高速公路护栏板成型机设备

一、设备概述（equipment overview）

本设备一次完成护栏板板材的校平、冲孔、成型、切断等工艺。设备由双锥式被动放料机、校平部分、冲孔部分、成型部分、切断部分等部件组成。

本设备是生产二波护栏板的专用机组；

The equipment as only for design of the two waves machine.

The equipment can form the highway guardrail with leveling, punching, forming and cutting etc. craft. It is consisted with de-coiler, leveling section, punching section, forming section and cutting section etc.

备由放料架、矫平装置、2台液压冲孔装置（其中一个冲孔装置冲制板材联接孔，另一组为冲制板材中间加强孔）、辊压成型机、液压切断装置、电控系统、液压系统等组成。

The equipment consists with the de-coiler, leveler, 2 sets hydraulic hole punch device (one is for the connection holes, anther is for the center holes) , the forming machine, hydraulic cutting device, the electric controlled system and hydraulic system etc.

整线成型主驱动采用一个减速电机加变频控制，速度控制、定长、定位控制准确可靠。

The main drive of the whole line uses a reducer with the frequency conversion to control, the speed control, length setting and the localization control are accurate and reliable.

二、技术参数 parameter

1、加工工件厚度： 3mm-4.0mm（材料：Q235）

Working piece thickness: 3mm-4.0mm (material Q235 cold steel)